Engineering Validation dialog
This dialog contains a grid that lists the validation
rules for an Engineering Validation
object.
The dialog is displayed when you double-click an Engineering Validation object in the Explorer window or Model Group window.
Show image
See the Working with engineering validation
topic for more details on individual rules.
| Item |
Description |
| Columns |
|
Rule ID
|
A unique identifier for the rule, set by the system. An 'I' prefix is
added to the Rule ID when it is displayed in the Code column of the Output window.
|
|
Description
|
A description of the validation
rule, set by the system and used as the basis for the Output window message.
|
|
Modified by User
|
This box is set by the system when you modify the validation rule.
|
|
Check Rule
|
If the box contains a cross, that rule will be checked.
You can click the boxes to remove or add a cross.
You can use the context menu to enable or disable all the validation rules at once. See below.
|
|
Priority Level
|
The priority level assigned to the rule is shown in the Output window.
By default, engineering validation rules are given a priority of 3. You
can change this to any numeric value. For serious errors or warnings,
you can set the priority level to 1 or 2 respectively.
|
|
Minimum
|
The minimum value against which the data is checked. This box is greyed
out when no minimum value is required for the rule.
|
|
Units
|
The units used for the minimum value.
|
|
Maximum
|
The maximum value against which the data is checked. This box is greyed
out when no maximum value is required for the rule.
|
|
Units
|
The units used for the maximum value.
|
|
| Context menu |
|
|
Enables all the validation rules.
|
|
|
Disables all the validation rules.
|
|
