Profile Properties Dialog
The Profile Properties dialog is displayed by right-clicking on a profile in the Event Editor and selecting Profile properties from the popup menu. The fields in the dialog define various aspects of an event profile.
The properties in the dialog vary depending on event type.
Depth / Pressure
|
Description |
|
|---|---|
|
Link Label |
Link reference from where the data was measured |
|
Link no. |
Not used |
|
Invert Level |
Invert level of the link where this data originated |
|
Conduit Height |
Height of the conduit where this data originated |
|
Ground Level |
Ground level for the link where this data originated |
|
Descriptive Title |
For information |
Rainfall
|
Description |
|
|---|---|
| Calibration / areal reduction |
Calibration factor to allow for errors in the gauge calibration. All rainfall intensities for the gauge are multiplied by this factor. |
|
Local antecedent depth |
Rainfall depth that has fallen in the hour immediately prior to the event |
|
Local evaporation |
Rate of evaporation |
|
Local UCWI |
Urban Catchment Wetness Index for use with UK Urban Catchment Runoff model |
|
Local New PR API30 |
API30 (for use with New PR runoff model) |
| Local Horton SMS | Soil Moisture Store representing the initial wetness of the catchment (for use with the Horton runoff model) |
| Local Green-Ampt SMD | The soil (initial) moisture deficit is the fraction difference between the soil porosity and actual moisture content, expressed as a percentage (for use with the Green-Ampt runoff model) |
|
Local SCS index |
Catchment wetness for use with the SCS, CN and CNSWMM runoff volume models. |
| Local ReFH soil moisture | Initial soil moisture content, Cini (for use with the ReFH or ReFH2 runoff model) |
| Local ReFH baseflow | Initial baseflow BF0 (for use with the ReFH or ReFH2 runoff model) |
|
Profile Title |
Title for the profile |
| Profile description | Descriptive title for the profile |
|
Gauge Data |
Can be used to specify a profile number for each rainfall profile. (Normally, rainfall profiles are consecutively numbered from 1.) Enter PROFILE=number in the Additional Data field. Once a profile number has been assigned it should be displayed in the profile column heading, and the colour changed to red. |
| ReFH ACF | ReFH adjustment coefficient |
| Snowmelt SCF | Snow Catch Factor |
