Return Period Analysis Grid Report Dialog
The Return Period Analysis Grid Report Dialog is used to produce an RPA report for a series of simulations using rainfall of different know return periods and storm durations.
The dialog is displayed when the Results | Grid report | Return period analysis report menu option is selected.
Show me
| Parameter | Description |
|---|---|
| Simulations |
Select the simulations to be analysed. Ideally this should be a series of simulations using design rainfall events where the rainfall event is the only variation. Choose a series of return periods for each of a series of storm durations. All the simulations must use the same network. |
| Label Conduits on GeoPlan with RPA Results | Check this option to display labels for conduits on the GeoPlan with the RPA results. |
| Surcharge State >= |
Read-only field. The conduit will be considered surcharged if its Surcharge State is greater or equal to 1. |
| Flood/Lost Volume |
Read-only field. Upstream node will be considered flooded if flood/lost volume is greater or equal to 0.001 m3 |
| Return Period (yrs) >= | Use this box to set the maximum return period in which you are interested. Above this value, if flooding occurs at the node, the RPA Report View displays an x to show return period above the specified maximum value. |
| Produce Grid button | Click this button to display the RPA Report View |
