Simulation Properties View
This view is displayed when you right-click a simulation in the Explorer window and choose Simulation properties from the Selection dialog.
Show me
The view provides the following read-only information and can also be used to re-run
|
Sim title |
The name of the simulation. |
| Start | The start time of simulation. This will be either an absolute or relative time. |
| Finish | The end time of simulation. This will be either an absolute or relative time. |
| Simulation providing initial state |
The simulation which provided the initial state. This box will be empty if no initial state simulation was specified for the parent run that this simulation was generated from. |
| Saved at | The time that the initial state simulation was saved at. This will be either Saved at end (if the Save state at end option was selected for the run in the Schedule Hydraulic Simulation View) or an absolute time. |
| State saving times |
The times that states were saved from this simulation. This will be either:
|
| Runoff only | If checked, it indicates that this is a runoff simulation. No check indicates that it is a hydraulic simulation. |
| Re-run simulation |
|
