Adjusting replay speed
You can adjust the replay speed by changing the delay that InfoWorks WS Pro applies between each timestep, before redrawing the network views with the data for the next timestep.
You can:
- Speed up the replay of large scale simulations by setting a zero or small delay.
- Slow down the replay at critical points by pausing, setting a long time delay, and then restarting the replay.
To set the replay delay:
- Choose Network | Results | Replay Options
.
Alternatively, click the
button on the Replay toolbar.This displays the Replay Options dialog.
- Choose a time delay in the Replay delay between jumps box.
You can set the delay in small increments up to half a second, and then at half a second increments for longer delays. The default delay, if you do not change this value, is 0.5 seconds.
Remember that redrawing may take some time, especially if you have background layers or a ground model displayed on the GeoPlan window. You may want to set a small delay in this case, or even no delay at all.
