Creating model groups

Creating a model group at the top level

  1. In the Model Group window or the Explorer window, right-click Master Database and select New | Model Group.
  2. In the New Name - Model Group dialog, change the default name for the model group if required.
  3. To generate a default set of sub-groups within the model group, check the Generate sub-groups box.
  4. To automatically generate sub-groups with default names, check the Auto name sub-groups box .

    The Auto name sub-groups box does not appear unless the Generate sub-groups box is checked.

  5. Click OK.
  6. If you did not check the Auto name sub-groups box, a prompt for the name of each sub-group will be displayed before it is created:

Creating a model group within an existing model group

  1. In the Model Group window or in the Explorer window, right-click a model group name and select New | Model Group.
  2. Use the New Name dialog to create the model group, as described above.

Explorer window

New Name dialog

Setting default model group sub-groups