Auto Labels
Auto labels are simple read only labels that can be shown or hidden for all objects of the same type, (they cannot be displayed for a selection of objects only).
Auto labels can be used to display:
- Network object identifier and / or the value of the parameter displayed in the current active theme for the object. The display may become a bit confused if both ID and theme value are displayed, as these are printed next to each other on the same line. Improve the display by zooming in on an area of interest.
- User defined text and values of selected parameters, set by selecting the Auto label User option in the Label Field group of the Auto Labels and Tooltips page of the GeoPlan Properties.
- Link End Labels: labels drawn at link ends displaying the upstream and downstream values of a selected parameter. Link End Labels are always displayed rotated along the line of the pipe.
Auto label operations
Most operations with auto labels are controlled by the Layers and Themes page and the Auto Labels and Tooltips page of the GeoPlan Properties dialog.
Display of auto labels for CCTV defects is controlled from the CCTV Defects page.
Displaying auto labels
For more details on how to display auto labels, see Displaying Labels on the GeoPlan.
Moving auto labels
Auto Labels are automatically positioned by InfoAsset Manager and cannot be moved, although pipe labels can be aligned either horizontally or rotated along the line of the pipe.
Editing auto labels
Configuration of the labels content and appearance is controlled via the Auto Labels and Tooltips page of the GeoPlan Properties dialog. To display the dialog, right click in the GeoPlan View and select Properties & Themes from the popup menu.
Deleting auto labels
Turning the display of Auto Labels on and off in the GeoPlan Window is controlled via the Layers and Themes page of the GeoPlan Properties dialog.
