Configure Meterage Capture dialog
This dialog allows users to specify custom communication parameters for the meterage / chainage device.
The dialog is displayed when the Configure button is clicked on the Meterage / Chainage page of the Options dialog.
Show image
| Option | Description |
|---|---|
|
Port |
Select the COM port that the camera is connected to on your PC or mobile device. |
|
Baud |
Select the baud rate for the output of the serial device. Default is 2400. |
|
Parity |
Select the type of error-checking to use. Default is None. |
|
Data bits |
Select the number of data bits used to represent characters. Default is 8. |
|
Stop bits |
Select the time between character transmission. Default is 1. |
|
Handshake |
Select the mode to use to initiate communication between the PC/ mobile device and the camera. Available options are:
Default is None. |
|
Test |
Click this button to test the connection to the meterage device. |
|
Save |
Save changes and close the dialog. |
|
Cancel |
Cancel the configuration. |
