Updating Initial Concentrations/Turbidities from Results

Initial Concentration and Initial Turbidity values for all nodes in the network can be updated using results from a previous simulation. To update initial concentration from a previous simulation:

  1. Open network and checked out Control Data to be updated.
  2. Choose Update Initial Concentrations or Update Initial Turbidities from the Network menu. This displays the Open Water Quality Simulation dialog.
  3. Select the previous simulation results set to be used and click the Open button.
  4. Select the time in the previous simulation results set to be used to provide initial concentration values for the current model.  
  5. Select a flag to be used to highlight the updated initial concentration/turbidity values.

Initial concentration/initial turbidity values will be updated for all nodes in the model.


Updating Networks

Water Quality Simulations

Water Quality Parameters