Importing Data from an InfoWorks Network to a SWMM Network

To import network data from an ICM InfoWorks network to an ICM SWMM network:

1. Ensure that the SWMM network, which you want to import the InfoWorks network data into, is open on the GeoPlan.
2. Select the Import | Model | from InfoWorks network option from the Network menu.

   The Import InfoWorks network dialog is automatically displayed. The name of the SWMM network open on the GeoPlan is contained in the read-only SWMM network box.

3. From the Explorer window, drag the InfoWorks network that you want to import the network data from and drop it into the InfoWorks network box.
4. Click OK, and the applicable items will be exported from the InfoWorks network and imported to the SWMM network.

ICM uses its SWMM5 importer and exporter to transfer most of the data between the networks. Information about the conversions made when exporting network data from an InfoWorks network can be found in the SWMM5 Network Export from an InfoWorks Network topic while conversion information about importing it to a SWMM network is contained in the SWMM5 Conversion Notes for SWMM Networks topic.

However, conversion information for the following ICM polygon and line types of network objects, for which ICM does not use its SWMM5 importer/exporter, can be found in the Conversion Notes - InfoWorks to SWMM Networks topic:

• Polygon:
• 2D Zone
• Mesh Zone
• Mesh Level Zone
• Porous Polygon
• Polygon
• Roughness Zone
• Roughness Definition
• Spatial Rain Zone
• Spatial Rain Source
• Line:
• General Line
• Porous Wall