Pump (Distribution) Data Fields

ID

A unique name for the asset. Upper and lower case letters are treated as being the same.

The ID is the primary key in the database for all objects. This means that the ID field must be unique for all objects of the same object type.

node_id

Text

40

0

Asset ID

An optional reference - usually the asset database name for this network object (if applicable).

asset_id

Text

40

0

Owner

The proprietor of the asset.

owner

Text

64

0

Area code

The zone ID in which the asset is contained.

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

area_code

Text

40

0

Operational status

The current functionality of the asset:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

operational_status

Text

20

0

Planning status

The current situation of the asset in relation to construction.

planning_status

Text

20

0

Pump group in the associated pumping station to which the pump belongs.

Pump group details are stored in the pumping station object.

Location

Address or description of site at which asset is located.

location

Text

100

0

Lateral pipe ID

The ID of the pipe to which the lateral is attached.

lat_pipe_id

Text

40

0

0

0

0

Lateral distance from start node

The distance along a pipe from the start node of the pipe to the location of the lateral (hydrant, fitting etc.)

lat_distance

Double

L

2

0

0

0

Elevation

Elevation above datum level (Usually sea level).

elevation

Double

Z

3

-99.99

X coord

X coordinate of the object.

x

Double

XY

2

Y coord

Y coordinate of the object.

y

Double

XY

2

Pump type

The type of pump:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

type

Text

20

0

Control mechanism

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

control

Text

10

0

Serial number

Pump serial number.

serial_number

Text

30

0

Manufacturer

The name of the company who fabricated the asset.

manufacturer

Text

20

0

Number of stages

Number of pump stages for multi-stage pumps.

num_stages

Long Integer

0

Suction diameter

Suction (inlet) diameter of the pump.

suction_diameter

Double

CAMS_PS

0

Pressure diameter

Pressure (outlet) diameter of the pump.

pressure_diameter

Double

CAMS_PS

0

Nominal speed

Rated speed of pump.

nominal_speed

Double

WN_AV

0

Nominal flow

Rated flow of pump.

nominal_flow

Double

IN_Q

2

Date serviced

The date of the most recent service.

date_serviced

Date / Time

0

Manhole

Reference ID of the manhole at which pump is located.

manhole_id

Text

40

0

Motor serial number

Serial number of pump motor.

motor_serial_number

Text

30

0

Date motor installed

The date of installation of the pump motor.

date_motor_installed

Date / Time

0

Condition grade

A measure of asset condition.

condition_grade

Long Integer

0

Critical

A measure of the likely impact of asset failure.

criticality

Text

5

0

Security

The security of the asset from unauthorised access/tampering:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

security

Text

10

0

Condition survey date

Date of the most recent condition survey of the asset.

survey_date

Date / Time

0

GPS survey date

The date of the most recent GPS survey (DD/MM/YYYY).

gps_survey_date

Date / Time

0

Date installed

The date when the asset was installed (DD/MM/YYYY). Used in costing reports in conjunction with the cost index.

date_installed

Date / Time

0

Date cleaned

The date the asset last underwent maintenance to improve performance (swabbing, scouring).

date_cleaned

Date / Time

0

Date renewed

The date the asset was last restored to its initial condition (replaced, relined).

date_renewed

Date / Time

0

Installation cost

The original installation cost of the asset. This generally includes all costs incurred (e.g. mantime, asset purchase costs etc). This information is used in depreciation reports

install_cost

Double

WN_COST

0

Inspection cost

Estimated cost of asset inspection.

inspection_cost

Double

WN_COST

0

Expected lifetime

The expected lifetime of the asset. This is used in depreciation reports as the period over which installation costs may be depreciated.

lifetime

Long Integer

0

Rehabilitation cost

Rehabilitation costs to be incurred in bringing the asset to an acceptable condition. This is used in rehabilitation reports.

rehab_cost

Double

WN_COST

0

Replacement cost

The estimated cost for completely replacing an asset

replace_cost

Double

WN_COST

0

Current value

Current value of the asset. This gives an indication of depreciation costs as depreciation cost = installation cost - current value

current_value

Double

WN_COST

2

Soil type

A description of the material surrounding the asset that could influence condition grading and rehabilitation methods:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

soil_type

Text

10

0

Surface type

A description of the ground use in close proximity to the asset that may influence access/costs for monitoring, maintenance or construction purposes:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

surface_type

Text

10

0

Headloss

The maximum loss in pressure, caused by the asset, across its entire length (usually at peak flow).

headloss

Double

HEAD

2

0

Click the button to display the Attachments Editor, used to attach and manage photos, sketches and other files associated with the network object.

See Attachments Editor and Common Data Fields for further details.

Click the button to display the Time Series Data Source Grid, which is used to specify or update the time series data streams that are linked to this pump.