Transient - Pressure page

The Transient - Pressure page allows a pressure profile to be entered for use in Transient System Simulations. The fields on this page are stored in the Control Data.

Applies to Reservoir, Fixed Head and Well nodes. A change in pressure at the node will produce a transient. Time/Pressure pairs are specified to define the pressure variation.

ClosedShow me

Check the Enable Surge option to model a pressure profile at the node during a transient simulation.

The time entered in the profile grid is time relative to the start of the simulation.

Property Sheets

Fixed Head Node

Fixed Head Node Data Fields


Reservoir Data Fields


Well Data Fields

Control Data