Treatment Works (Collection) Data Fields

ID

The name of the object.

The ID is the primary key in the database for the network object. This means that the ID field of each object must be unique for all objects of the same object type.

id

Text

40

0

Asset ID

An optional reference - usually the asset database name for this network object (if applicable).

asset_id

Text

40

0

Owner

The proprietor of the asset.

owner

Text

64

0

Area code

The zone ID in which the asset is contained (DA, WSZ, WOA, PMA).

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

area_code

Text

40

0

Operational status

Current operational status:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

status

Text

20

0

Planning status

The current situation of the asset in relation to construction.

planning_status

Text

20

0

Location

Address or description of site at which asset is located.

location

Text

100

0

X coord

X coordinate of the object.

x

Double

XY

2

Y coord

Y coordinate of the object.

y

Double

XY

2

Average daily inflow

Average daily inflow into the treatment works.

ave_daily_inflow

Double

Q

2

Average peak inflow

Average daily inflow into the treatment works under peak conditions.

ave_peak_inflow

Double

Q

2

Consented discharge

Consented discharge limit.

consented_discharge

Double

Q

2

Average daily discharge

Average daily discharge from the treatment works.

ave_daily_discharge

Double

Q

2

Receiving watercourse

Name of watercourse to which treatment works discharges

receiving_watercourse

Text

100

Supervising engineer

Name of engineer responsible for site.

supervising_engineer

Text

20

0

Condition grade

A measure of asset condition.

condition_grade

Long Integer

0

Critical

A measure of the likely impact of asset failure.

criticality

Text

5

0

Security

The security of the asset from unauthorised access/tampering:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

security

Text

10

0

Condition survey date

Date of the most recent condition survey of the asset.

survey_date

Date / Time

0

GPS survey date

The date of the most recent GPS survey (DD/MM/YYYY).

gps_survey_date

Date / Time

0

Date installed

The date when the asset was installed (DD/MM/YYYY). Used in costing reports in conjunction with the cost index.

date_installed

Date / Time

0

Date cleaned

The date the asset last underwent maintenance to improve performance (swabbing, scouring).

date_cleaned

Date / Time

0

Date renewed

The date the asset was last restored to its initial condition (replaced, relined).

date_renewed

Date / Time

0

Installation cost

The original installation cost of the asset. This generally includes all costs incurred (e.g. mantime, asset purchase costs etc). This information is used in depreciation reports

install_cost

Double

WN_COST

0

Inspection cost

Estimated cost of asset inspection.

inspection_cost

Double

WN_COST

0

Expected lifetime

The expected lifetime of the asset. This is used in depreciation reports as the period over which installation costs may be depreciated.

lifetime

Long Integer

0

Rehabilitation cost

Rehabilitation costs to be incurred in bringing the asset to an acceptable condition. This is used in rehabilitation reports.

rehab_cost

Double

WN_COST

0

Replacement cost

The estimated cost for completely replacing an asset.

replace_cost

Double

WN_COST

0

Current value

Current value of the asset. This gives an indication of depreciation costs as depreciation cost = installation cost - current value.

current_value

Double

WN_COST

2

Soil type

A description of the material surrounding the asset that could influence condition grading and rehabilitation methods:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

soil_type

Text

10

0

Surface type

A description of the ground use in close proximity to the asset that may influence access/costs for monitoring, maintenance or construction purposes:

The options available in the dropdown list depend on the choices defined in the Standards and Choice Lists dialog.

surface_type

Text

10

0

Click the button to display details of collections of pumps in the treatment works.

The Pump section is read-only. The information displayed in it is specified in the pump data fields:

The Pump goup section is editable, and is used to provide details of the pump group.

Database Table Name: cams_pump_station_groups

Click the button to display the Attachments Editor, used to attach and manage photos, sketches and other files associated with the network object.

See Attachments Editor and Common Data Fields for further details.

Click the button to display the Time Series Data Source Grid, which is used to specify or update the time series data streams that are linked to this treatment works.