Parameter Selection Dialog

This dialog is used to select which object parameters are to be graphed when producing the following graph reports:

• Simulation Report
• Location Report

It is displayed when you click Produce Graphs on either the Locations dialog or the Simulations dialog.

Show me

Results can be displayed for selected Nodes, Links, Subcatchments, and for InfoWorks networks only, 2D Point Source, 2D Line Source or Network Results Objects.

All Results Analysis Objects are also supported by the graph reports.

• Location: select the object type to be graphed. Object types available will depend on the selection defined in the Locations dialog or the Simulations dialog. For multiple simulations and multiple locations reports, when plotting Link results, select whether to display results from the Upstream or Downstream end.
• Parameters To Plot: select up to a maximum of three parameters to be displayed. The parameters that are available will depend on the type of object selected in the Location Selection group.

It is possible to turn on / off the display of various items on the Graph View by use of the options at the bottom of the dialog:

• Include title block - display title block at the top of the Graph View
• Include grid lines - display grid lines on the Graph View
• Include statistics table - display statistics table at the bottom of the Graph View

The following dialog options are only available when generating a Simulation Report for objects in an InfoWorks network:

• Include Rainfall - display rainfall trace (applies to single simulation reports when graphing nodes, links, subcatchments and 2D results analysis points only)
• Include Ground Level - display ground level trace (applies to single simulation reports when graphing nodes only)
• Include Flood Level - display flood level trace (applies to single simulation reports when graphing nodes only)
• Include Soffit Level - display soffit level trace (applies to single simulation reports when graphing links only)
• Include Observed - display TVD connector comparison results (applies when viewing simulations using TSDB data only)