Link Results Data Fields (InfoWorks)

All results fields are displayed on the results grid and on the Link Property Sheet while viewing a replay of a simulation.

Time varying results are shown with the field name in an alternate colour on the grid. Non time varying results have the field name in the normal black type.

The database field names listed in the main table may be prefixed as detailed below according to the object that the field applies to.

Prefix Network Object
ds_BC Downstream side of contraction reach of bridge
us_BC Upstream side of contraction reach of bridge
ds_BE Downstream side of expansion reach of bridge
us_BE Upstream side of expansion reach of bridge
us Upstream end of link
ds Downstream end of link
BO_DS Downstream end of bridge opening
BO_US Upstream end of bridge opening
RR River reach
_LEFT (suffix) Left bank line
_RIGHT (suffix) Right bank line

Database Table Name: __IWR_Link

Hydraulic Results

Field Name

Help Text

Units

Attribute

Max US/DS depth

Maximum depth at upstream/downstream end of link experienced during simulation

Y

DEPMAX

Max US/DS velocity

Maximum velocity at upstream/downstream end of link experienced during simulation

V

VELMAX

Max US/DS Froude number

Maximum Froude number at upstream/downstream end of link experienced during simulation

 

FR_MAX

Max US/DS flow

Maximum flow at upstream/downstream end of link experienced during simulation.

Q

QMAX
Max US/DS Total Head Maximum total head at upstream/downstream end of link experienced during simulation Z  

US/DS cumulative flow

Accumulated flow (volume) at upstream/downstream end of link

VO

QCUM

Pipe full capacity

Capacity of conduit. This is the total capacity of a conduit, including all barrels.

Q

PFC

Cumulative Inflow

Applicable to links to which subcatchments drain.

Cumulative Inflow is calculated as the integral with respect to time of:

Lateral inflow (from subcatchment draining to the link) - conduit infiltration

VO

QLICUM

Link Type

Type of link

 

TYPE
Max surcharge state

Indicates whether the flow rate in the system exceeded the capacity of the drainage network to the extent that levels rose within manholes at any time during the simulation.

Maximum surcharge state can be one of the following values:

Value Description
<1

Not surcharged

Where the ratio of water depth (max_depth) to pipe height (conduit_height) is 0 or less than 1
1 Surcharged by depth
2 Surcharged by flow

See Surcharge Rate for more details.

   maxsurchargestate
Max Infiltration loss

Maximum infiltration loss out of the conduit into the surrounding ground during simulation.

Infiltration is calculated as the sum of:

Wetted surface area of region x Infiltration coefficient of region

Where regions are: base and side of the conduit.

See Sustainable Urban Drainage Systems for more details.

 Q QINFLNK
Max lateral flow

Maximum lateral flow value during simulation.

Applicable to links to which subcatchments drain.

Lateral inflow is equal to the inflow from the associated subcatchment to the link.

 Q QLINK
Section reach chainage Chainage of section along river link L RR_CHAINAGE
Maximum flow from 2D Zone

Applicable to 2D conduits only

Maximum net flow from the 2D zone into 2D conduits.

Positive for flows from 2D zone to 2D conduits, negative for flows from 2D conduits to 2D zone.

 Q TWODFLOW
Cumulative flow from 2D Zone

Applicable to 2D conduits only

Cumulative net flow from the 2D zone into 2D conduits.

Positive for flows from 2D zone to 2D conduit, negative for flows from 2D conduits to 2D Zone.

 VO TWODQCUM
Maximum flooding onto 2D Zone

Applicable to 2D conduits only

Maximum flow from the 2D conduits onto the 2D zone.

Positive for flows from 2D conduits to 2D zone, zero for flows from 2D zone to 2D conduits.

 Q TWODFLOODFLOW
Cumulative flooding onto 2D zone

Applicable to 2D conduits only

Cumulative flow from 2D conduits to the 2D Zone.

Cumulative flow from the 2D conduit onto the 2D zone calculated as the integral of outflows from the conduits.

 VO TWODQCUMFLOOD

Field Name

Help Text

Units

Attribute

Depth

Vertical distance from invert to water level

Y

DEPTH

Flow

Volume of fluid passing point in link per unit time

Q

FLOW

Velocity

Distance travelled by fluid per unit time

V

VEL

Froude number

Froude number calculated as:

Fr = SQRT[(Q2 x B) / (gA3)]

where:

Q = flow, m3/s

B = surface width, m

g = acceleration due to gravity, m/s2

A = cross section area, m2

 

FROUDE
Total Head

Total head calculated as:

H + v2/2g

where:

H = level (mAD)

v = velocity (m/s)

g = acceleration due to gravity (m/s2)

 Z totalhead

Hydraulic Gradient

Hydraulic gradient at current timestep

 

HYDGRAD
Level Level in link at current timestep Z Level

Pump State

Result

Meaning

1

On

-1

Off

0

An intermediate state (neither on, nor off.) A pump can only change its state (switch on / off) at a major timestep. Therefore one scenario is that the level could pass below the switch off level and potentially even through the floor of the wet well, before the pump has an opportunity to switch off. To avoid this, the pump will enter this intermediate state (reported as a pump state of zero) until the next timestep is reached

 

PMPSTATE

Infiltration Loss

Infiltration out of the conduit into the surrounding ground.

Infiltration is calculated as the sum of:

Wetted surface area of region x Infiltration coefficient of region

Where regions are: base and side of the conduit.

See Sustainable Urban Drainage Systems for more details.

Q

QINFLNK

Lateral Inflow

Applicable to links to which subcatchments drain.

Lateral inflow is equal to the inflow from the associated subcatchment to the link.

Q

QLINK

Regulator State

Regulator state

 

STATE
Regulator State (opening) Regulator state, degrees   STATE_D

Regulator State (length)

Regulator state, length

L

STATE_L

Regulator State (flow)

Regulator state, flow

Q

STATE_Q

Regulator State (depth above min)

Regulator state, level above datum

Y

STATE_Z

Status

Applicable to simulations using the Timestep Log option on the Run Diagnostics Dialog.

The status value may be useful in diagnosing simulation problems.

See the Link Status Results topic for details.

 

STATUS

Surcharge State

In conduits the Surcharge State field indicates whether the flow rate in the system has exceeded the capacity of the drainage network to the extent that levels rise within manholes.

Value

Description

<1

Pipe is not surcharged. The water level is below the soffit level at both ends of the pipe.

Surcharge State is calculated as the ratio of water depth to pipe height.

1.00

Water level at the upstream and / or downstream end of the pipe is above the soffit level, and the flow is less than or equal to the pipe's full capacity.

2.00

Water level at the upstream and / or downstream end of the pipe is greater than the soffit level, and the flow is greater than the pipe's full capacity.

In Channels, surcharge state is calculated as flow depth divided by maximum depth of the channel; where the maximum depth of the channel is determined from the Channel Shape associated with the Channel.

In River Reach objects, surcharge state is calculated as flow depth divided by maximum reach depth; where maximum reach depth is the largest of the max elevation - min elevation values calculated for each section making up the reach.

 

Surcharge

Variable speed

Applicable to VFD pumps

Speed of variable frequency drive pump.

WN_AV

VARSPEED

Volume

Volume in link

VO

VOLUME
Flooding onto 2D zone

Applicable to 2D conduits only

Flow from 2D conduit onto 2D zone.

Positive for flows from 2D conduit to 2D zone, zero for flows from 2D zone to 2D conduit.

 Q TWODFLOODFLOW
Flow from 2D zone

Applicable to 2D conduits only

Net flow from 2D zone into 2D conduit.

Positive for flows from 2D zone to 2D conduit, zero for flows from 2D conduit to 2D zone.

 Q TWODFLOW
Variable bank level

Applies to Inline bank property sheets only.

Click the button to display a grid of bank vertices.

Note: data is only displayed when there is variation in the level of the inline bank due to modelling of a breach.

Grid column Description
Vertex Number of vertex, where vertex 1 is the start point of the inline bank.
Varying crest elevation Elevation of the vertex at the simulation time at which the grid was opened.
Z VIB_ELEVATION
Variable bank offset

Applies to Inline bank property sheets only.

Click the button to display a grid of structure vertices.

Note: data is only displayed when there is variation in the level of the inline bank due to modelling of a breach.

Grid column Description
Vertex Number of vertex, where vertex 1 is the start point of the inline bank.
Varying crest offset Distance of the vertex from the start of the inline bank.
L VIB_OFFSET

Water Quality Results

Field Name

Help Text

Units

Attribute

Max US/DS concentration <SFX>

Maximum mass concentration of sediment fraction at upstream/downstream end of link, where <SFX> represents the sediment fraction name.

MCSI

MC<SFX>

Max US/DS concentration <CFX> dissolved

Maximum mass concentration of dissolved water quality determinant at upstream/downstream end of link, where <CFX> represents the coliform determinant name.

MCSI

MC<CFX>DIS

Max US/DS concentration <PPP> dissolved

Maximum mass concentration of dissolved water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name.

MCSI

MC<PPP>DIS

Max US/DS concentration <CFX> <SFX>

Maximum mass concentration of attached water quality determinant at upstream/downstream end of link by sediment fraction, where <CFX> represents the coliform determinant name and <SFX> represents the sediment fraction name.

MCSI

MC<CFX><SFX>

Max US/DS concentration <PPP> <SFX>

Maximum mass concentration of attached water quality determinant at upstream/downstream end of link by sediment fraction, where <PPP> represents the determinant name and <SFX> represents the sediment fraction name.

MCSI

MC<PPP><SFX>
Max US/DS concentration <PPP> detrital Maximum mass concentration of detrital water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name. MCSI MC<PPP>DET

Max US/DS concentration <CFX> total

Total maximum mass concentration of water quality determinant at upstream/downstream end of link, where <CFX> represents the coliform determinant name.

MCSI

MC<CFX>TOT

Max US/DS concentration <PPP> total

Total maximum mass concentration of water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name.

MCSI

MC<PPP>TOT

Max US/DS mass flow <SFX>

Maximum mass flow of sediment fraction at upstream/downstream end of link, where <SFX> represents the sediment fraction name.

MFSI

MF<SFX>
Max US/DS mass flow <CFX> dissolved Maximum mass flow of dissolved water quality determinant at upstream or downstream end of link, where <CFX> represents the coliform determinant name. MFSI MF<CFX>DIS
Max US/DS mass flow <PPP> dissolved Maximum mass flow of dissolved water quality determinant at upstream or downstream end of link, where <PPP> represents the determinant name. MFSI MF<PPP>DIS

Max US/DS mass flow <CFX> <SFX>

Maximum mass flow of attached water quality determinant at upstream/downstream end of link by sediment fraction, where <CFX> represents the coliform determinant name and <SFX> represents the sediment fraction.

CFS

MF<CFX><SFX>

Max US/DS mass flow <PPP> <SFX>

Maximum mass flow of attached water quality determinant at upstream/downstream end of link by sediment fraction, where <PPP> represents the determinant name and <SFX> represents the sediment fraction.

MFSI

MF<PPP><SFX>
Max US/DS mass flow <PPP> detrital Maximum mass flow of detrital water quality determinant at upstream/downstream end of link, where <PPP> represents determinant name. MFSI MF<PPP><DET>

Max US/DS mass flow <CFX> total

Total maximum mass flow of water quality determinant at upstream/downstream end of link, where <CFX> represents the coliform determinant name.

MFSI

MF<CFX>TOT

Max US/DS mass flow <PPP> total

Total maximum mass flow of water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name.

MFSI

MF<PPP>TOT

Max US/DS mass flow

coliforms

 Maximum mass flow of coliforms at upstream/downstream end of link.   MFCOLDIS
Max US/DS mass flow coliforms total Maximum total mass flow of coliforms at upstream/downstream end of link.   MFCOLTOT
Max US/DS concentration H2S dissolved Maximum concentration of dissolved hydrogen sulphide at upstream/downstream end of link MCSI MCH2S

US/DS maximum pH

 Maximum pH value at upstream/downstream end of link experienced during simulation.   PHMAX
US/DS minimum pH Minimum pH value at upstream/downstream end of linkexperienced during simulation.   PHMIN

Max US/DS sediment depth

Maximum sediment depth at upstream/downstream end of link.

RSD

SEDDEP
Average sediment depth at start of initialisation Average sediment depth at start of initialisation. Y SD1AVE
Average sediment depth at end of simulation Average sediment depth at end of simulation. Y SD2AVE

Total mass of <CFX> at start of initialisation

Total mass of water quality determinant at start of initialisation phase, where <CFX> represents the coliform determinant name.

M

TM1<CFX>

Total mass of <PPP> at start of initialisation

Total mass of water quality determinant at start of initialisation phase, where <PPP> represents determinant name.

M

TM1<PPP>
Total mass of MAC on bed at start of initialisation Total mass of macrophytes on the bed at start of initialisation phase. M TM1MACBED
Total mass of detrital <PPP> at start of initialisation Total mass of detrital water quality determinant at start of initialisation phase, where <PPP> represents the determinant name. M TM1<PPP>DET

Total mass of <SFX> at start of initialisation

Total mass of sediment fraction at start of initialisation phase, where <SFX> represents the sediment fraction names.

M

TM1<SFX>
Total mass of coliforms at start of initialisation Total mass of coliforms at start of initialisation.   TM1COL

Total mass of <CFX> at end of initialisation

Total mass of water quality determinant at end of initialisation phase, where <CFX> represents the coliform determinant name.

M

TM2<CFX>

Total mass of <PPP> at end of initialisation

Total mass of water quality determinant at end of initialisation phase, where <PPP> represents the determinant name.

M

TM2<PPP>
Total mass of MAC on bed at end of initialisation Total mass of macrophytes on the bed at end of initialisation phase. M TM2MACBED
Total mass of detrital <PPP> at end of initialisation Total mass of detrital water quality determinant at end of initialisation phase, where <PPP> represents the determinant name. M TM2<PPP>DET

Total mass of <SFX> at end of initialisation

Total mass of sediment fraction at end of initialisation phase, where <SFX> represents the sediment fraction name.

M

TM2<SFX>
Total mass of coliforms at end of initialisation Total mass of coliforms at end of initialisation.   TM2COL

Total mass of <CFX> at end of simulation

Total mass of water quality determinant at end of simulation, where <CFX> represents the coliform determinant name.

M

TM3<CFX>

Total mass of <PPP> at end of simulation

Total mass of water quality determinant at end of simulation, where <PPP> represents determinant name.

M

TM3<PPP>
Total mass of MAC on bed at end of simulation Total mass of macrophytes on the bed at end of simulation. M TM3MACBED
Total mass of detrital <PPP> at end of simulation Total mass of detrital water quality determinant at end of simulation, where <PPP> represents the determinant name. M TM3<PPP>DET

Total mass of <SFX> at end of simulation

Total mass of sediment fraction at end of simulation, where <SFX> represents the sediment fraction name.

M

TM3<SFX>
Total mass of coliforms at end of simulation Total mass of coliforms at end of simulation.   TM3COL
US/DS maximum water temperature Maximum temperature of water at upstream/downstream end of link experienced during simulation CF TWMAX
US/DS minimum water temperature Minimum temperature of water at upstream/downstream end of link experienced during simulation CF TWMIN
Active layer depth River bed active layer depth. Y ACTIVE_LAYER_DETPH
Maximum mass of <SFX> attached to <CFX> in bed Maximum mass of sediment fraction attached to pollutant in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <SFX> represents the sediment fraction name and <CFX> represents the coliform determinant name. M MBED<CFX><SFX>
Maximum mass of <SFX> attached to <PPP> in bed Maximum mass of sediment fraction attached to pollutant in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <SFX> represents sediment fraction name and <PPP> represents determinant name. M MBED<PPP><SFX>
Maximum mass of <SFX> attached to <CFX> in deposited layer

Maximum mass of sediment fraction attached to pollutant in river bed deposited layer, where <SFX> represents the sediment fraction name and <CFX> represents the coliform determinant name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

 M MDLR<CFX><SFX>
Maximum mass of <SFX> attached to <PPP> in deposited layer

Maximum mass of sediment fraction attached to pollutant in river bed deposited layer, where <SFX> represents sediment fraction name and <PPP> represents determinant name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

 M MDLR<PPP><SFX>

 

Field Name

Help Text

Units

Attribute

US/DS concentration <SFX>

Concentration of sediment fraction at upstream/downstream end of link, where <SFX> represents the sediment fraction name.

MCSI

MC<SFX>

US/DS concentration <CFX> dissolved

Concentration of dissolved water quality determinant at upstream/downstream end of link, where <CFX> represents the coliform determinant name.

MCSI

MC<CFX>DIS

US/DS concentration <PPP> dissolved

Concentration of dissolved water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name.

MCSI

MC<PPP>DIS
US/DS concentration <PPP> detrital Concentration of detrital water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name. MCSI MC<PPP>DET

US/DS concentration <CFX> <SFX>

Concentration of water quality determinant at upstream/downstream end of link by sediment fraction, where <CFX> represents the coliform determinant name and <SFX> represents the sediment fraction name.

MCSI

MC<CFX><SFX>

US/DS concentration <PPP> <SFX>

Concentration of water quality determinant at upstream/downstream end of link by sediment fraction, where <PPP> represents the determinant name and <SFX> represents the sediment fraction name.

MCSI

MC<PPP><SFX>
US/DS coliforms Concentration of coliforms at upstream/downstream end of link.   MCCOLDDIS
US/DS concentration H2S dissolved Concentration of dissolved hydrogen sulphide at upstream/downstream end of link. MCSI MCH2S

US/DS mass flow <SFX>

Mass flow of sediment fraction at upstream/downstream end of link, where <SFX> represents the sediment fraction name.

MFSI

MF<SFX>
US/DS mass flow <CFX> dissolved Mass flow of dissolved water quality determinant at upstream/downstream end of link, where represents the coliform determinant name. MFSI MF<CFX>DIS
US/DS mass flow <PPP> dissolved Mass flow of dissolved water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name. MFSI MF<PPP>DIS
US/DS mass flow <PPP> detrital Mass flow of detrital water quality determinant at upstream/downstream end of link, where <PPP> represents the determinant name. MFSI MF<PPP>DET

US/DS mass flow <CFX> <SFX>

Mass flow of water quality determinant at upstream/downstream end of link by sediment fraction, where <CFX> represents the coliform determinant name and <SFX> represents the sediment fraction.

CFS

MF<CFX><SFX>

US/DS mass flow <PPP> <SFX>

Mass flow of water quality determinant at upstream/downstream end of link by sediment fraction, where <PPP> represents determinant name and <SFX> represents sediment fraction.

MFSI

MF<PPP><SFX>

Mass flow <CFX> total

Total mass flow of water quality determinant, where <CFX> represents the coliform determinant name.

MFSI

MF<CFX>TOT

Mass flow <PPP> total

Total mass flow of water quality determinant, where <PPP> represents the determinant name.

MFSI

MF<PPP>TOT

Mass flow

coliforms

 Mass flow of coliforms.   MFCOLDIS
Mass flow coliforms total Total mass flow of coliform.   MFCOLTOT

US/DS sediment depth

Sediment depth at upstream/downstream end of link.

RSD

SEDDEP

Potency factor <CFX> <SFX>

Potency factor of water quality determinant by sediment fraction, where <CFX> represents the coliform determinant name and <SFX> represents the sediment fraction name.

PF

PF<CFX><SFX>

Potency factor <PPP> <SFX>

Potency factor of water quality determinant by sediment fraction, where <PPP> represents determinant name and <SFX> represents sediment fraction name.

PF

PF<PPP><SFX>
US/DS pH pH at upstream/downstream end of link.   PH

US/DS shear stress (N/m2)

Shear stress at bed at upstream/downstream end of link.

 

TAU
US/DS water temperature Temperature of water at upstream/downstream end of link. CF TW
US/DS uninonised ammoniacal nitrogen Concentration of uninonised ammoniacal nitrogen at upstream/downstream end of link. MCSI UNNH3
US/DS concentration H2S dissolved Concentration of dissolved hydrogen sulphide at upstream/downstream end of link. MCSI MCH2S
US/DS saturated DO

Concentration of saturated dissolved oxygen at upstream/downstream end of link.

Only displayed when carrying out a Water Quality simulation including modelling of Dissolved Oxygen.

 MCSI DO_SAT
Mass of <SFX> in bed Mass of sediment fraction in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <SFX> represents sediment fraction name. M MBED<SFX>
Mass of determinant <CFX> in bed Mass of determinant in river bed, where <CFX> represents the coliform determinant name. M M<CFX>BED
Mass of determinant <PPP> in bed Mass of determinant in river bed, where <PPP> represents the determinant name. M M<PPP>BED
Mass of detrital <CFX> in bed Mass of detrital pollutant in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <CFX> represents the coliform determinant name. M MBED<CFX>DET
Mass of detrital <PPP> in bed Mass of detrital pollutant in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <PPP> represents the determinant name. M MBED<PPP>DET
Pore water conc of dissolved <CFX> in bed Pore water concentration of dissolved pollutant in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <CFX> represents the coliform determinant name. MCSI MCPWBED<CFX>DIS
Pore water conc of dissolved <PPP> in bed Pore water concentration of dissolved pollutant in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <PPP> represents determinant name. MCSI MCPWBED<PPP>DIS
Pore water conc of dissolved <CFX> in deposited layer

Pore water concentration of dissolved pollutant in river bed deposited layer, where <CFX> represents the coliform determinant name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

 MCSI MCPWDLR<CFX>DIS
Pore water conc of dissolved <PPP> in deposited layer

Pore water concentration of dissolved pollutant in river bed deposited layer, where <PPP> represents determinant name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

 MCSI MCPWDLR<PPP>DIS
Mass of detrital <CFX> in deposited layer

Mass of detrital pollutant in river bed deposited layer, where <CFX> represents the coliform determinant name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

 M MDLR<CFX>DET
Mass of detrital <PPP> in deposited layer

Mass of detrital pollutant in river bed deposited layer, where <PPP> represents determinant name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

 M MDLR<PPP>DET
Mass of <SFX> in deposited layer

Mass of sediment fraction in river bed deposited layer, where <SFX> represents sediment fraction name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

 M MDLR<SFX>
Potency factor of <CFX> attached to <SFX> in bed Potency factor of pollutant attached to sediment fraction in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <CFXPP> represent the coliform determinant name and <SFX> represents the sediment fraction name.   PFBED<CFX><SFX>
Potency factor of <PPP> attached to <SFX> in bed Potency factor of pollutant attached to sediment fraction in river bed active layer, if there is a deposited layer, or non-consolidated bed, if there is no deposited layer, where <PPP> represent determinant name and <SFX> represents sediment fraction name.   PFBED<PPP><SFX>
Potency factor of <CFX> attached to <SFX> in deposited layer

Potency factor of pollutant attached to sediment fraction in river bed deposited layer, where <CFX> represents the coliform determinant name and <SFX> represents the sediment fraction name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

   PFDLR<CFX><SFX>
Potency factor of <PPP> attached to <SFX> in deposited layer

Potency factor of pollutant attached to sediment fraction in river bed deposited layer, where <PPP> represents determinant name and <SFX> represents sediment fraction name.

(Only present if one or more reaches has a non-zero active layer depth. For reaches that have no deposited layer, values will be zero.)

   PFDLR<PPP><SFX>
Section bed offset

Bed offset for a river reach section. This is the depth of erosion of the parent layer which never decreases because the parent layer is never replenished.

(Only present if one or more reaches uses the uniform bed update method. For reaches that use the invert bed update method, values will be zero.)

 Y BED_OFFSET
Section sediment depth

The depth of sediment for a river reach section.

 Y SEDDEP
Section net deposition

The net deposition (Section sediment depth minus Section bed offset) for a river reach section.

(Only present if one or more reaches uses the uniform bed update method).

 Y NETDEP

Results Data Fields

Links

Viewing Replays of a Simulation